<i id="hjlhp"><menuitem id="hjlhp"></menuitem></i>

<form id="hjlhp"><nobr id="hjlhp"><progress id="hjlhp"></progress></nobr></form>

<noframes id="hjlhp"><address id="hjlhp"><listing id="hjlhp"><nobr id="hjlhp"></nobr></listing></address>

      ZSW Series Vibrating Feeder

      ZSW Series Vibrating Feeder is designed based on the principle of exciting force generated by two eccentric shafts. It is mainly used for continuous and even feeding before primary crushing.

      ZSW Series Vibrating Feeder

      Max. Feed Size: 500/580/750/600x900x1200/700x1050x1400/800x1200x1600 (mm)
      Processing Capacity: 150-1250(t/h)
      Application Fields: mining, construction, metallurgy, cement, chemical industry.
      Applied Material: ore with compressive strength less than 280 Mpa, rock, slag.

      Description

      ZSW Series Vibrating Feeder is designed based on the principle of exciting force generated by two eccentric shafts. It is mainly used for continuous and even feeding before primary crushing. Besides feeding, at the same time, it works as pre-screening. The pre-setting gap between grizzly bars avoid unnecessary power consumption of the following crushers, which improves the crushing efficiency. ZSW Series Vibrating Feeder is widely used in feeding process of metallurgy, mining industry, construction, chemical industry and construction aggregate .

      Features

      1. The gap between grizzly bars can be adjusted ,so it has wide application and makes good pres-creening performance.
      2. The feeding for the primary crushing can be controlled by adjusting power speed.
      3. Stable vibration and low noise makes it safe and reliable when start and stop the machine.
      4. It is optional to add the extra high for side plate and extra liner .It is optional to change whole plate and steel plate with drilled-holes instead of grizzly bars in the pre-screening part , so it can be used in different working conditions.

      Working Principle

      The exciter works as the vibration source of the vibrating feeder which is composed of two eccentric shafts (driving shaft and driven shaft) and gears. The electromotor drives the driving shaft to rotate at high speed, the gear of the driving shaft engages with the driven shaft, and then the two shafts rotate together in the reverse direction that make the trough body moving forward the material continuously. When the material moves along the grizzly bar, the material that is smaller than the screen hole will drop down the gap between grizzly bar, thus realizing classifying.

      Technical Specification

      Model

      Max. Feed Size

      Rotating Speed

      Capacity

      Power

      Dimension

      (mm)

      (r/min)

      (t/h)

      (kw)

      (mm)

      ZSW380×95

      500

      500-800

      ~150

      11

      3970×2259×1880

      ZSW420×110

      580

      500-800

      150~280

      15

      4392×2519×2003

      ZSW490×110

      580

      500-800

      150~350

      18.5

      5093×2545×2014

      ZSW600×130

      750

      500-800

      220~560

      30

      6124×2863×2051

      ZSW600×150

      900

      500-800

      260~620

      37

      6271×2369×2698

      ZSW600×180

      1050

      600-850

      400 ~ 1000

      45

      6268×2653×3097

      ZSW600×210

      1200

      600-850

      550 ~ 1250

      45

      6417×2880×3159

      Request For Quotation

      If you have any suggestions and opinions about our products, please leave a message and we will immediately answer your questions. Thanks for the support.

      中旺科app推广